Trifield 100XE EMF Meter

See larger image

Additional Images:

TriField Meter Model 100XE

Features: Magnetic, Electric, and Radio/microwave Detection All in One Package, Omni-directional electric and magnetic sensitivity, Hand-held portability and simplicity, Extremely easy to use, Made in USA


Model: 2017 updated Version
Measuring Range: 0-14.0 pH
Resolution: 0.1 pH
Accuracy: ±0.1 pH?20°C )
Use Environment: RH 95%, 0-50??32?176? )
Battery: 2×1.5V LR button cell
Weight: 1.76 OZ

?High Quality and Durable
It’s highly accurate for measuring range of 0-14 PH, 0.1 PH resolution, measure & display pH result simultaneously with LCD display, reliable and quick reading.

? Easy to Use
You just remove the protective cap and immerse the PH meter electrode in the solution and turn on the PH by “ON / OFF” switch to be measured. Beats the heck out of trying to see the colors of a litmus strip.

?Easy to Calibrate
You can simply follow the instruction on the provided packet of solution 4.01 or 6.86, immerse the PH tester in the solution until numbers get stable..

Package Includes:
? 1 x PH Meter
? 3 x Calibration packets
? 1 x Carrying case
? 1 x User’s manual

? Clean the electrode with distilled water every time before and after use
? Be careful with the glass probe since it may be a little fragile when you use.
? Remember to gently wipe it with a clean, soft cloth when you’re done before capping it again.
? Open the battery case or replace battery, then need to re-calibrate the meter

New From: 0 Out of Stock

The Trifield Meter is a gaussmeter, electric field meter and radio field strength meter in a single unit. When measuring electromagnetic fields (EMFs), the primary concern is usually magnetic fields, which can be tricky to measure. If a less sophisticated 1-axis gaussmeter is used, a reading of zero could result even where the field is strong. A 1-axis meter must be oriented correctly to measure the field (which is a vector). The 3-axis Trifield Meter solves that problem by measuring the true strength of the field regardless of which way it is oriented. Therefore, the Trifield Meter can be scanned rapidly across an area without having to stop at each point to search for the orientation that gives a maximum reading. Another section of the meter detects AC electric fields, which can exist independently of AC magnetic field. The third section detects radio/microwave, such as from a leaky microwave oven. Analog (needle-type) display has very fast response time compared to digital. This meter is good for measuring AC (artificial) magnetic fields rapidly, AC electric fields rapidly, such as from overhead power lines or improperly grounded equipment. Can locate wiring in walls (using the 100XE version) and major RF/microwave sources such as leakage from microwave ovens, or the field near cell towers. Operates about 40 hours on replaceable standard 9V battery, has a low battery indicator.